Profile

We welcome you to PRADO Grease and Lubricant LLC, manufacturing a full range of automotive and industrial lubricant based on mineral and synthetic technology.
We are located in New Industrial Area Ajman – U-A-E with lubricant blending capacity of 12000Mton and 2400Mton of various types of Greases annually.
The company produces and markets a comprehensive selection of high-quality lubricants which find their way in was a wide range of applications. The products and developed and produced by specialists who can choose from a wide variety of base oil and additives, to obtain lubricants meeting the latest standards of Original Equipment Manufacturers (OEM’s) and International standardization Committees. The ISO 9001 & API (American Petroleum) certified manufacturing unit offers products with 100% compliance.
At PRADO we invest in R&D and keep close contact with the latest development in lubricant industry.
Our products are sold directly and through local distributors offering best possible services to end users.

PRADO ULTRA
API CI-4 SAE 15W-40

It is high performance diesel engine oil specially design for use high turbocharged diesel engines running on extremely low diesel engine as well as conventional high diesel fuel. Its advance additive system ensure excellent control over soot induced wear, high temperature piston deposits, corrosion, foaming and oxidation stability.

API CI-4, CH-4/CF/SI

Cummins ES 20078

ACEA A3-4/E704/B304/H304

Mack EO-M Plus

MB 228 J, 229, 1

MTV Level 2

VOI,VO VTX

DETERNIT DIESEL DDC 93K215

M AN 3275

Result R DT-2

CATTERFILLER ECF -1-1

JAS DHD -1

 

PRADO PLUS
API CF-4 SAE 15W-40 20W-50, 50, 60

It is high performance diesel engine oil formulated with high quality solvent refined base oils and advance technology added to meet and exceed the lubrication requirements of charged diesel engines, trucks, vans, buses and passenger vans etc.

API CF-4

MB 228 1

ACEA E2 96

MAN 271

 

PRADO PREMIUM
API CF/SF SAE, 20W-50, HD-50, HD-60, HD-70

It is high performance diesel engine oil available in both multi and mono viscosity grades. Blended with mineral base oils and selective additive system. It is suitable for use on-road and off-road engines.

 

API CF/SF

ALLISON C3

MR 277 0

CAT TO 2

MIL L-1-43-152C

 

 

PRADO SYN
API SN/SM, SAE 0W-20, 5W-30, 5W-40

It is modern fully synthetic motor oil for high performance normally aspirated and turbo charged petrol engines in passenger cars and high commercial vehicles and is suitable for all driving conditions. It is miscible with all synthetic and mineral based engine oils. Excellent for long oil drain intervals.

API SN/SM

DAILMER CHRYSLER, MB 229,31

ACEA 3/F4/C4

VIV 501/505

 

 

PRADO PLATINIUM
API SL/CF, SAE 10W-40

It is superior quality motor oil produced from synthetic and highly refined mineral base oil with latest technology additives to meet the stringent lubricant specification of recent high performance charged gasoline engines.

API SJ

VALVO VDC

ACEA A1, B3, E2

MB 228.1, 229.1

 

 

PRADO GOLD 6000
API SJ, SAE 20W-50, 15W-40, 30, 40

It is superior quality multi-grade engine oil specially developed for modern automobiles having high performance engine. It is produced from selected base oils and advanced additive to meet the stringent requirements of gasoline engines.

API SL/CF

MB 229.1

ACEA A3-98, B3-95

US MIL L-46152 E

 

 

 

PRADO SILVER 5000
API SF/CC, SAE 20W-50, 15W-40, 30, 40

It is superior quality multi-grade engine oil specially developed for modern automobiles having high performance engine. It is produced from selected base oils and advanced additive to meet the stringent requirements of gasoline engines.

 

4-STOKES MOTOR CYCLE OIL

PRADO SUPER 4T
API SL/CF, SAE 5W-30, 10W-40, 15W-40, 20W-50

It is an advanced technology, semi-synthetic motor cycle oil that gives your oil exceptional cleansing properties with special cleansing agents that actively and continuously lock away harmful dirt and deposits. It provides your engine with superior protection and superior clutch and gearbox operation for high performance four-stroke motor cycle.

 

API

SL/CF

JASO

MA

 

PRADO POWER 4T
API SJ, SAE 10W-30, 15W-40, 20W-50

It is guaranteed quality lubricant based on a blend of high viscosity index mineral oils and additives. It is blended to meet the all year around requirements of four-stroke motor cycle engines.

API

SJ

SAE

1300

JASO

M4

 

 

 

 

PRADO SUPER 2T
API TC

It is premium quality for two strokes motor cycle engines. It guarantees very good engine protection and cleanliness, reliable control against exhaust system blocking and reduce exhaust smoke. It is suitable both for all oil-injection and system and meets the requirements of leading manufacturers.

API

TC

JASO

FB

 

CNG OIL

PRADO NATURAL
API SJ, SAE, 15W-40, 20W-50

It is premium quality lubricant fortified with special tackiness additive to provide additional lubricity to engines converted or force to run on natural gas. Special field tested formulation develop with high viscosity index base oil and additives, protect these engine from early wear of cracks because of dry gases running in fuel.

 

PRADO GEAR OIL
GL-4, GL-5, SAE 90, 140 85W-140

It is designed and manufacture from selected premium quality base oil and additive oil to provide excellent protection for heavy duty manual transmission in equipment and vehicles. These oils are high performance, multi-purpose, thermally stable, extreme pressure automotive hypoid gear oils.

 

PRADO ATF
TYPE A SUFFIX A

It is an automatic transmission fluid blended with refined base oil suitable additive package to meet the requirements of general motor type A, specification.

MB ZJ 6.2

GM TASA

ALLISON C-2

 

 

PRADO ATF
DEXRON-III

It is formulated with high viscosity index mineral oils and additive package to provide excellent additive wear, corrosion resistant, thermal stability at high temperature as well as excellent low temperature characteristics. Its friction modify properties ensure consistent and ensure smooth shift in all driving conditions.

MB 236.1 & 236.6

MAN 339 TYPE D & P

ALLICON C-4

VOITH 5306335

 

 

PRADO HYDROULIC

It is formulated with high viscosity index mineral oils and additive package to provide excellent additive wear, corrosion resistant and great deal of with added bonus of performance in the presence of water. It is available in all ISO-VG viscosity grades.

 

DENISON HF 0 T6H20C

EATON M-2950-S, T-286-83

CINCINNATI MACH P-86, P-69 & P-70

DIN 515JA PART 1&2

 

PRADO BREAK FLUID
DOT 3, DOT 4

It is high non mineral fluids based on glycol ethers and other chemicals.

Application Dot 3, hydraulic brake system (disk and drum brakes) of any chemical vehicles, passenger cars, motorcycle requiring a brake fluid meeting FMVSS DOT 3and SAE J 1703 standard.

Application of DOT 1 Hydraulic brake fluid systems (disk and drum and locking brakes system) in cars, motorcycles and commercial vehicles where DOT 4 type of brake fluid specified.

Dot 3 & 4

DIN/ISO 4925

FMVSS 116(DOT 3)

SAE J1703 (DOT 3)

 

 

 

 

PRADO FLUSHING OIL

It is light bodied mineral oils for flushing purposes. It contains additive system for cleaning deposits in various engines parts running over period of working hours. Recommended for flushing of automotive, industrial and agriculture engine, gear boxes and hydraulic systems.

 

PRADO COOLANT
It is radiant coolant developed to meet modern engine requirements operating high temperatures. It is a glycol fluid with specially, anti-rest anti-corrosion inhibitor. The coolant is suitable for use in all passenger cars.

 

PRADO GREACE (EP & MP)
NI, GI 2 & 3

PRADO EP & MP greases developed for automotive services, bearing and universal joined applications. These greases are made from mineral base oil thickened with soap and performance enhancing additive agents with operating temperatures ranging from -30 to+120 °C.

 

PRADO SYSTEM OILS (6/9)

They are premium quality lubricant for crosshead diesel engine crankcase system. They are mono grade SAE viscosity oils having TBN ranging from 6 to 9. Also these oils can be used in stationary diesel engine for power generation and reduction gear boxes. They meet API service classification of CD and MIL-L 2104C.

PRADO TPEO OILS

They are superior quality detergent lubricant blended specifically for use in a trunk piston engines in a verity of services. They are available in various TBN numbers of match the different types of fuel. They are available in different total base number of 20 30 and 40 in SAE 30 40 and 50 viscosity grade.

 

PRADO CYLINDER OILS

They are superior quality marine cylinder lubricant for use in all type of low speed cross head diesel engine lubricant fuel with sulfur contents of up to 3.5 t%. They are ideally suited for the new generation of highly rated, fuel different slow speed marine diesel engines operating with higher pressure and higher liner wall temperatures with longer stokes. They are available in 40 & 50 SAE Viscosity grades having TBN of 70 % 90.

 

HYDRAULIC OILS

They are blended with high quality based oils and additives. THE products have rest preventive characteristics with resistance to oxidation. It is recommended for use in hydraulic applications. Available in all ISO, EATON, ISO 11158, AFNOR 48-603.

 

GEAR OILS

They are blended with high quality based oils and extreme pressure additives. High load capability and superior frictional characteristics ensure low gear tooth wear and help frictional energy loses which lead to high all temperature oils. Available in all ISO VG viscosity grades.

 

COMPRESSOR OIL

They are blended with high quality hydro treated paraffinic base oil for the lubrication of rotary sliding vane and screw air compressors. It resists formation of carbon deposits in sliding vane slots enabling them to move freely. Also resist deposit formation on rotating component of screw compressor. They will allow the oil drain piston to be up to 4000 hours even when operating at a continuous maximum discharge air temperature up to 100 °C. It can also use a refrigeration compressor oil where AMMONIA is use as refrigeration. It is not at all recommended to be used as refrigeration compressor oils where CPC such as R12, R22, R134 are use. Available in all ISO VG viscosity grades.

 

REFRIGERATION COMPRESSOR OIL

They are blended with high quality base oil without additives. Provide very low power points high resistance to deposits. Specific selection of oils and advance refining techniques give a range of products suitable for the efficient lubricant of refrigeration compressor. It is design for the lubrication of compressor using hydrocarbon refrigerator. For all refrigeration and air conditioning application meeting requirements of DIN 51503 KC, KAA and KL.

 

TURBINE OIL

They are blended with serve hydro-treated paraffinic base oil with R %O additives. A planted, metal free additive technology ensures that this product offers improves performance over conventional turbine oils. Its complete combination of excellent oxidation stability, sludge control and surface properties make this oil first chance lubricant for emerging combined cycle turbine technology. It exceed and meet demand for OEM s, GEK 28143, GEK 46506, SIMENS

21 & 55125%3, ABBSTAL, K-110-8121 etc.

 

SOLUBLE CUTTING OIL

It is highly stable oil in water emulsion develop for use as a general purpose as a, cost-effective, metal working, fluid. They are available for machining, grinding law to medium, silver, copper, and their alloy. It is nitrite free, phenol, chlorine free.

 

 

 

 

HEAT TRANSFER OIL

They are blend of carefully selected, solvent refined, high viscosity index mineral oil chosen for their ability to provide superior performance in indirect closed fluid heat transfer system operating bulk temperature up to 320°C.

 

GAS ENGINE OILS

They are blend of severely hydro-treated solvent base oil and superior selected additive package, containing mineral ash and low ash. They are use in stationary diesel engines designs to meet emerging legislation limiting emission of NOx, and those which employs the latest lean or clean burn technology. They exceed major OEM requirements of WAUKESHA, API CD, JENBACHER, WARTSILA SACM. They are available in SAE 30 & 40 viscosity grades.

 

CIRCULATING, SLIDE WAY, ELECTRICAL OILS

Above and various industrial which includes synthetic are also available in meeting customer requirements.

 

LITHIUM MP 2 & 3

It is lithium soap based greases manufactured for heavy duty industrial and multipurpose. They are design for the lubricant of rolling demand and plan bearings such as those found in a steel, paper, mining and construction industries.

 

LITHIUM EP 2 & 3

It is premium quality multipurpose heavy duty industrial greases based upon lithium hydroxystearable soap thickener fortified with extreme pressure additives.

 

LITHIUM COMPLEX 1, 2, 3

It is intended for a wide verity of applications. It provide excellent high temperature with excellent addition structure ability and resistance to water. This grease have level of chemical stability and offers excellent protection against rest corrosion ad wear, rings and bearings. Dropping point for these greases is above 260°C.

 

LITHIUM COMPLEX (MoS2)

They are lithium soap complex greases fortified with MoS2 to enhance extreme pressure properties is required. It has outstanding protection against corrosion and excellent adhesive and water resistance properties. Dropping point for such greases is above 260°C. It is suggested to operate between -10 to 150°C.

 

LITHIUM SULFONATE

This grease is manufacturer for high quality calcium sulfonates and sulfonic acids with inclusion of selected base oil. These grease have great extreme pressure and very high dropping point of above 300 °C. They have excellent water wash away properties and are suitable in application where heavy water comes in content with the bearing and machinery part.

 

CLAY BASED

These are heavy duty, high temperature, industrial greases for slow speed plan bearing application. They are based on an in organic non-soap thickeners dispersed in high viscosity base oils. They lubricant satisfactorily and give good service life at operating temperature up to 200 °C. They are especially useful where heavy wear has occurred or access in difficult.


 

 

NIGI CONSISTANCY NUMBERS

NIGI number

ASTM worked (60 STROKEN)

Equivalent ISO Grades

Extreme pressure gear

lubricant

 

Presentation at 25°C

C5t (2%) at 40 de

 

AGMA Lubricant NO.

……..of a millimeter

Appearance

Consistency food along

 

000

445-475

Cooking oil

00

420-390

Semi-fluid

Apple source

0

355-385

Very hard

Brown mustard

1

310-340

Suk

2

265-295

“normal” grease

Perrot batter

3

250-285

Fur

Vegetable

4

175-205

Very fur

5

130-160

hard

Smooth pate

6

85-115

Very hard

Heeder cheese